Phaetus Rapido Plus Hotend 2 HF, Blue

The 24V Phaetus Rapido Plus 2 Hotends are the perfect choice for printing with high temperature and fibre filaments! They are compatible with countless materials and are designed for temperatures of up to a maximum of 350 °C.

There are two versions of the Rapido Plus 2 Hotend :

• Rapido Plus Hotend 2 HF (High Flow):

The HF version is compatible with V6 nozzles.

• Rapido Plus Hotend 2 UHF (Ultra High Flow):

The UHF version is also compatible with V6 nozzles. The enclosed V6-compatible extension nut made of plated copper is required for quick nozzle changes.

Features of the Rapido Plus 2 Hotends at a glance:

New heater block design for high-speed printing

The new heater block design features a larger melting zone to meet the needs of high-speed, high-temperature printing.

Titanium heatbreak

Compared to the stainless steel heatbreak of the Rapido Plus Hotends, Rapido Plus 2 Hotends have a heatbreak made of strong and light titanium. This robust material is characterised by lower thermal conductivity and less cooling capacity required, as well as excellent thermal insulation. This ensures better extrusion control and higher print quality.

The optimised structure also reduces the risk of deformation and clogging.

Ceramic heater planar structure

The 90-watt ceramic heater of the Rapido Plus Hotend 2 has a planar structure that is characterised by high reliability and higher heating output. To illustrate, the heating element heats up to 200°C in an incredible 35 seconds!

Removable thermistor

Rapido Plus Hotend 2 uses a removable PT1000 thermistor that is easy to service and replace.

Quickly switch between high-flow & ultra-high-flow printheads

A unique structural design enables fast switching between high-flow and ultra-high-flow printheads. The different nozzle types meet the needs of high-temperature and fibre filament printing.

The adapter included in the delivery allows you to quickly switch between the hotends to meet any requirements. With a few simple twists you can set the optimal flow rate!

Nozzle change with one hand

The titanium alloy screws, which ensure a firm connection between the heating block and the heat sink, are characterised by low thermal conductivity. This rigid structure allows for easy one-handed nozzle changing.

Danger! Although Rapido Plus Hotend and Rapido Plus Hotend 2 have the same dimensions, their heating element and heatsink are different. Therefore, these cannot be interchanged.

Tip: The maximum flow rate during extrusion is 52 mm³/s.

Included:

• 4 x M2.5x8.0 Socket Head Screws
• 2 x M2.5x5 Hex Socket Screws
• 1 x M2x1.8 Button Head Screws with O-Rings
• 1 x Black Heatblock Extension Cable
• 1 x White Thermistor Extension Cable
• 1 x 1.5/2.0 Hex Key
• 1 x Bowden Cable
• 1 x Coupling Clip

Rapido Hotend 2 HF/UHF vs. Rapido Plus Hotend 2 HF/UHF: