LDO Motors Voron 2.4 300 RevD Kit

About the Voron 2.4

The Voron 2.4 3D printer kit is perfect for those who are looking for an exciting 3D printing project and want to put their printing skills to the test. The Voron 2.4 is a well-designed open source CoreXY 3D printer that is known for its reliability, impressive looks and high performance. This kit is ideal for advanced hobbyists who want to take a closer look at various components of their 3D printer.

While the kit already contains many high-quality parts, the rest is up to you. Print the missing parts yourself and create your own FDM printer. Here you can see which parts of your printer you need to print yourself.

►Important note: The LDO kit does not include a Raspberry Pi. It must be purchased separately.

► Important note: The components included in the kit are designed for use with the Stealthburner print head. You can find assembly instructions, firmware, STL files and much more under the following link:

• Stealthburner

Stable performance

All Voron printers are built with CoreXY or CoreXZ configurations to reduce the amount of moving mass and enable higher acceleration and speed.

Download Fusion 360 and get a free licence to view the 3D model of the printer. The 3D model is helpful if the manual is difficult to follow.

Once you have finished building your Voron 3D printer, you will receive a serial number here.

Coloured aluminium extrusion profiles and linear rails made of stainless steel

LDO Motors offers several colour variants of the aluminium extrusion profiles.

The stainless steel linear rails are incredibly durable. After building your 3D printer, grease the rails properly to ensure smooth operation of the rails.

E3D Revo Voron Hotend

An E3D all-metal Revo Voron hotend is included in the RevD delivery.

Bondtech IDGA

The gears of the RevD Dual Drive extruder are upgraded to Bondtech IDGA. The assembly reduces the concentricity of the main drive gear.

Nevermore filter

The optional Nevermore Micro V5 internal circulation filter is included in the kit (carbon pellets not included due to shipping restrictions).

Leviathan Control Board and Nitehawk SB USB Toolhead Board

In comparison to RevC, which is equipped with the Octopus mainboard from BIGTREETECH, the RevD works with the Leviathan control board. The powerful controller has been specially developed for Voron 3D printers and is optimally adapted to its requirements.

The HartK Toolhead Board has been replaced by the Nitehawk SB USB Toolboard. The board is based on Klipper USB and has an integrated RP2040 MCU, a TMC2209 driver and an acceleration sensor.

Included tools

• The delivery includes a specially machined brass tip for a soldering iron, with which the heatset inserts can be easily installed. Find out more about the heatset insert tool here.
• An Input Shaper Tool is also included in the delivery. This tool allows you to easily perform the input shaper calibration.
• Since 1.5 mm Allen keys wear out easily, there are several in the kit.
• Metric 2 mm bits are included in the kit as they are not commonly available in some parts of the world. Use them to ream the filament path in your printed extruder parts.
• The kit also includes both black oxide hex nuts and stainless steel square nuts.

  Pre-cut and pre-wired cables

  The kit contains all the necessary cables, cut to the correct length and pre-crimped or soldered to the corresponding parts.

  Other additions to the Voron V2.4 RevD kit:

  • Silicone bed heater in LDO design,
  • Externally mounted thermistor for more accurate measurement of chamber temperature,
  • 4.3-inch touchscreen,
  • COB LED strip,
  • LDO Printed Parts are included in the delivery,
  • Pre-assembled magnetic sheet on an aluminium plate.

  ---

  BOM

  Wiring Guide

  Printed Parts Guide