E3D Revo Six

With the Revo Six you can upgrade the existing V6 setup on your 3D printer to the RapidChange Revo system for tool-free nozzle changes.

► REVO SIX COLDSIDE ►

The Revo Six Coldside Kit lays the foundation for you to upgrade your existing, old E3D V6 setup to the Revo system. Together with one of the compatible hotside kits, you get the opportunity to take advantage of numerous advantages of the RapidChange Revo ecosystem, including:

► Compact and lightweight design,

► Same height, diameter and attachment as the E3D V6,

► No adjustments to the device are required

► Compatible with Revo nozzles, allowing nozzle changes at room temperature without tools,

► Easy identification of the individual nozzles through colour coding of the silicone socks,

► and much more

Included:

• 1 x Revo Six HeatSink
• 1 x Collet
• 1 x Collet Clamp
• 1 x Extension cable for the heater
• 1 x Thermistor Extension Cable
• 1 x Fan
• 1 x 100mm PTFE Tube

► REVO REVO SIX HOTSIDE ►

Starter, 12V/24V

Ideal for 3D printing beginners and those who prefer standard materials such as PLA, PETG and ASA for printing their creations.

Included:

• 1 x 0.4mm Revo Nozzle Brass
• 1 x 0.6mm Revo Nozzle Brass
• 1 x 40W Revo HeaterCore with spring, 12V or 24V

High flow, 24V

Get the most out of your 3D printer and enjoy the benefits of high-speed printing! With the Revo High Flow nozzles you can increase the volumetric flow rate by an amazing 70%. These nozzles have optimised internal nozzle geometry and ensure better heat transfer to the filament.

Included:

• 1 x 0.4 mm Revo nozzle high flow, made of brass
• 1 x 0.6 mm Revo nozzle high flow, made of brass
• 1 x 0.4mm Revo Nozzle Brass
• 1 x Revo silicone socks (2 x 0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm + socks for the HeaterCore)
• 1 x 60W Revo HeaterCore with spring, 24V

High flow X, 24V

With this kit, you get the abrasion resistance you need, combined with outstanding high-flow results. The included High Flow ObXidian nozzles have a special E3DLC coating, which makes them extremely robust and wear-resistant. This kit is ideal for printing with abrasive polymers such as glass or carbon fibre filled materials.

Included:

• 1 x 0.4mm Revo ObXidian High Flow Nozzle
• 1 x 0.6mm Revo ObXidian High Flow Nozzle
• 1 x 0.4mm Revo Nozzle Brass
• 1 x Revo silicone socks (2 x 0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm + socks for the HeaterCore)
• 1 x Revo 60W HeaterCore with spring

Genius 400, PT100/PT1000

True 3D makers have special requirements. This expert kit therefore offers the opportunity to push the boundaries of 3D printing with high flow, high temperatures up to 400°C and the necessary abrasion resistance. Included nozzles allow experimentation with the Revo system and allow machining of almost any material available on the market.

Included:

• 1 x 0.25mm RapidChange Revo Nozzle Brass
• 1 x 0.4mm RapidChange Revo ObXidian Nozzle
• 1 x 0.4mm RapidChange Non-Planar Nozzle
• 1 x 0.6 mm RapidChange Revo nozzle HT-Abrasive
• 1 x 0.6mm Revo ObXidian High Flow Nozzle
• 1 x 60W Revo HeaterCore with spring, 24V
• 1 x Revo high-temp heating block
• 1 x high-precision heating cartridge
• 1 x PT100 or PT1000 temperature sensor
• 1 x Revo Silicone Socks

Genius Metal, PT100/PT1000

The Genius Metal Kit combines the benefits of the Metal 400 Kit with an additional wear-resistant Revo DiamondBack nozzle with a polycrystalline diamond tip for metal and ceramic-filled filaments.

Included:

• 1 x 0.25mm RapidChange Revo Nozzle Brass
• 1 x 0.4mm RapidChange Revo ObXidian Nozzle
• 1 x 0.4mm RapidChange Non-Planar Nozzle
• 1 x 0.6 mm RapidChange Revo nozzle HT-Abrasive
• 1 x 0.6mm Revo ObXidian High Flow Nozzle
• 1 x 60W Revo HeaterCore with spring, 24V
• 1 x Revo high-temp heating block
• 1 x high-precision heating cartridge
• 1 x PT100 or PT1000 temperature sensor
• 1 x Revo Silicone Socks