BondTech LGX Shortcut Mosquito Printhead

Master all materials

The LGX Shortcut Mosquito printhead is a special unit that includes the LGX Large Gears Extruder and the LGX Shortcut Hotend with a short filament path based on the Copperhead, which masters all materials. The print head is therefore the perfect choice for processing soft and flexible materials.

The LGX Shortcut Mosquito Printhead only supports 1.75mm filament.

Developed for more flexibility

The LGX Shortcut Mosquito is a special hotend for use with the LGX Extruder. With the LGX Extruder, it forms a print head that excels at printing most materials and especially soft and flexible filaments.

Designed to be flexible

The LGX Shortcut Mosquito Hotend includes a reversible heatsink that can be attached to the left or right side of the cooling block. The heatsink also includes the hole pattern for attaching 40 x 40mm fans.

Cooling down the heatbreak

Bondtech's tests indicate that one 4010 fan is sufficient to cool the heatsink and cold zone of the heatbreak, even with a small contact area with the heatsink.

If you have an application that requires additional cooling, try a 4020 fan or 2 LGX heatsinks, one on each side.

Benefits of the LGX Shortcut Mosquito Printhead

• Allows processing of all available materials
• Enables faster printing of flexible and soft materials
• It is small and light
• Allows mounting in many different ways

Compatible Nozzles

The heater block included in this product is compatible with the RepRap nozzle standard. Here is a list of compatible versions.

• Bondtech brass nozzle
• Bondtech nozzle made of coated brass
• Bondtech CHT nozzle made of coated brass
• Slice Engineering Copper Nozzle
• Slice Engineering Vanadium Steel Nozzle (for Abrasive Filaments)

Note: The LGX Shortcut Mosquito Hotend is NOT compatible with 3DSolex 1.75mm nozzles.

You can find more information about the technical specifications here.